Amplifier gain: 1 or 10 Gain accuracy: ±1% Bandwidth: >100 MHz Risetime: <3.5 ns Output impedance: 50 ohm Intended output load: 50 ohm Maximum output: limited at ±0.50 V into 50 ohm. Input attenuation: ÷1 or ÷10 ÷10 Attenuator accuracy: ±0.05%
Precision Voltage Source Output range: ±15.5 V DC accuracy: 0.05% of reading +500 µV (15° to 45°C) Control: Oscilloscope Offset Knob Temperature coefficient: typically <5 ppm/°C of full scale. Type: Oven stabilized buried zener. Auto-zero: Sets output to zero when 0.0 volts selected and periodically thereafter.
Power Requirements Line voltage requirement: 100 to 250 V AC Line frequency range: 48 - 66 Hz Power requirement: 35 W maximum
)
)
)
)
)
)