Keysight N9020A 26.5GHz Spectrum Analyzer
SOLD OUT sold
spe477













OS:Windows 7

Option
526 Frequency Range 26.5GHz
B25 Analysis bandwidth 25MHz
EP2 Enhanced Performance LO,MXA
P26 Preamplifier 26.5GHz
2FP Spectrum Analyzer Measurement Application
1FP Noise Figure Measurement Application
AFP Noise Figure Enhancement

Frequency Range:10Hz to 26.5GHz

Span
Range:0Hz,10Hz to 26.5GHz
Resolution:2Hz
Sweep point:1 to 40001

RBW
Range:1Hz to 3MHz,4,5,6,8MHz

VBW
Range:1Hz to 3MHz,4,5,6,8MHz and wide open

Analysis Bandwidth
Maximum bandwidth:25MHz

Amplitude
Frequency Response:
20Hz to 10 MHz ± 0.6 dB
10 MHz to 3.6 GHz ± 0.45 dB
3.5 to 8.4 GHz ± 1.5 dB
8.3 to 13.6 GHz ± 2.0 dB
13.5 to 22.0 GHz ± 2.0 dB
22.0 to 26.5 GHz ± 2.5 dB

Displayed average noise level (DANL)
Frequency Specification Typical
1 to 10 MHz –150 dBm –153 dBm
10 MHz to 2.1 GHz –151 dBm –154 dBm
2.1 to 3.6 GHz –149 dBm –152 dBm
3.6 to 8.4 GHz –149 dBm –153 dBm
8.4 to 13.6 GHz –148 dBm –151 dBm
13.6 to 17.1 GHz –144 dBm –147 dBm
17.1 to 22 GHz –143 dBm –146 dBm
22 to 26.5 GHz –136 dBm –142 dBm

PreampOn DANL
1 to 10MHz -161 dbm -163 dbm
10 MHz to 2.1 GHz –163 dBm –166 dBm
2.1 to 3.6 GHz –162 dBm –164 dBm
3.6 to 7.0 GHz –162 dBm –166 dBm
7.0 to 13.6 GHz –162 dBm –165 dBm
13.5 to 17.1 GHz –159 dBm –163 dBm
17.0 to 20.0 GHz –157 dBm –161 dBm
20.0 to 26.5 GHz –152 dBm –157 dBm

Third-order intermodulation distortion (TOI)
Frequency TOI Typical
10 to 100 MHz +12 dbm +17 dbm
100 to 400 MHz +15 dBm +20 dBm
400 MHz to 3.6 GHz +16 dBm +20 dBm
3.6 to 13.6 GHz +16 dBm +19 dBm
13.6 to 26.5 GHz +15 dBm +18 dBm

Phase noise
Noise sidebands:
(20 to 30 °C, CF = 1 GHz)
Offset Specification Typical
100 Hz –91 dBc/Hz –100 dBc/Hz
1 kHz – –112 dBc/Hz
10 kHz –113 dBc/Hz –114 dBc/Hz
100 kHz –116 dBc/Hz –117 dBc/Hz
1 MHz –135 dBc/Hz –136 dBc/Hz
10 MHz – –148 dBc/Hz