Keysight E5061B 005/010/020/3L5 VNA + Impedance Analyzer
SOLD OUT sold
net410










Test frequency range:5 Hz to 3 GHz
Source output level:-45 to +10 dBm (at 5 Hz to 3 GHz)
Dynamic range:>120 dB (at 1 MHz to 3 GHz, IFBW = 10 Hz)
Trace noise:5 mdBrms (IFBW=3 kHz/Auto)
Number of point:1601 points
IFBW:1Hz to 300kHz,
plus IFBW Auto mode (option 3L5 only)

Impedance analysis
Impedance paramter:
IZI、θz、IYI、θy、Cp、Cs、Lp、Ls、Rp、Rs、D、Q、R、X、G、B
Measurement methods:
Port 1 Refl ection, Port 2 Refl ection, Port 1-2 Series-thru, Port 1-2 Shunt-thru, Gain-phase Series-thru, Gain-phase Shunt-thru

Test frequency:
5 Hz to 3 GHz (Port-1 and 2), 5 Hz to 30 MHz (Gain-Phase test port), 1 mHz resolution

AC source power (Osc level):
–45 to + 10 dBm (when the source port is terminated with 50 Ω

DC voltage bias:
0 to +-40 V (100 mA max.) 1 mV resolution (0 V to ±10 V), 4 mV resolution (10 V to 40 V, -10 V to -40 V), DC bias monitor available (voltage or current)

Output impedance:50 Ω (nominal)

Line power
Frequency 47 Hz to 63 Hz
Voltage 90-264 VAC (Vpeak > 120 V)
VA max 300 VA max
Power consumption
135 W (Option3L5)

Option
005:mpedance analysis function LF-RF network analyzer
010:Time domain/Fault location analysis
020:Standard hard disk drive
3L5:LF-RF network analyzer with DC bias source,
5 Hz to 3 GHz
Accessory(付属品):Power cord(電源コード)