HIOKI 8861-50 8956*8 Memory Hi-Corder 10MHz 12bit 16ch 1GW
SOLD OUT sold
rec415










Analog unit 8956*8
•2ch Voltage
•Input connectors Isolated BNC connector (input impedance 1 Mohm //40 pF)
Max. rated voltage to earth: 300 V AC, DC (with input isolated from the unit, the maximum voltage that can be applied between input channel and chassis and between input channels without damage)
•Measurement range: 5 mV - 20 V/division, 12 ranges, full scale: 20 divisions, AC voltage for possible measurement / display using the memory function: 280 V rms
low-pass filter: 5Hz/500Hz/5kHz/1MHz
•Measurement resolution 1/100 of measurement range (using 12-bit A/D conversion; installed in 8860 series)
•Highest sampling rate 20 MS/s (simultaneous sampling in 2 channels)

Number of input Units:Max 8 units
Number of channels:Max.
32 analog channels Max.
128 channels with scanner unit) + 16 logic channels (standard configuration)
Measurement ranges(20 div full-scale):
Measurement functions:
MEM (high-speed recording)
REC (real-time recording)
REC & MEM (realtime recording + high-speed recording) FFT (frequency analysis)
Real-time Save (records directly to storage media)
Data storage media:PC Card Type II slot × 2, Hard disk drive (option) × 1
Display:10.4 inch TFT color LCD (SVGA, 800 × 600 dots)
External interfaces:GP-IB (PC card), USB2.0 (series A receptacle 3 ports), LAN (HTTP/FTP/ Send mail or other), Monitor output (15-pin D-sub, SVGA output)
Option
9718-50(HDD unit),
9715-52:1 GW
8995:A4 printer Unit

J-Manual*4,CD-ROM(Application Disk),Power Code,
Input Cable(9198)*16,Flash512MB