Stanford Research SR785 100kHz 2ch FFT Analyzer
SOLD OUT sold
spe299










Frequency Range:102.4kHz or 100kHz,
FFT spans:195.3mHz to 102.4kHz or 191mHz to 100kHz,The two displays can havedifferent spans and start frequencys.
FFT Resolution:100,200,400 or 800 lines,
Real-Time Bandwidth:102.4kHz,
Accuracy:25ppm,
Dynamic Range:90dB typ,80dB guaranteed.
Harmonic distortion:<-80dB,
Intermod distortion:<-80dB,
Spurious:<-80dBfs,
Alias responses:<-80dBfs,
Full span FFT noise floor:-100dBfs typical,
Residual DC response:<-30dBfs,
Amplitude Accuracy(single ch):+-0.2dB,
(Cross ch):+-0.05dB,DC to 102.4kHz,
Phase Accuracy(single ch):+-3.0deg,
(Cross ch):+-0.5deg(DC to 51.2kHz),+-1.0deg(DC to 102.4kHz),
Signal Input:2ch,
Full scale input range:-50dBB(3.16mVp) to 34dBV(50Vp) in 2dB steps,
Maximum input level:57Vp,Configuration:Single-ended(A) or differential(A-B),Impedance:1Mohm+0.01uF,
Time Capture:2M samples,
Trigger Input Mode:Free Run,Internal or External TTL,
Interface:IEEE-488.2,RS-232 and Printer Interface standard,
Hardcopy:Print to dot matrix and PCL compatible printers,Plot to HP-GL or postscript plotters.
Disk:3.5 Dos format,1.44Mbyte,
Power Source:70W,100/120/220/240VAC,50/60Hz,
Dimensions:17"*8.25"*24"(WHL),
Weight:56lbs,