Newport Model 350 Laser Diode Thermoelectric Temperature Controller
SOLD OUT sold
opt460






Output
Type:Bipolar, constant current source
TEC Control Loop Type:Hybrid P-I-D
TEC Output:Current, Max. (A) ±5
Compliance Voltage (V):11.0
Available Output Power (W):55

Current Limit
TEC Output Range (A):0–5.05
Accuracy(mA):±9
TEC Ripple/Noise (rms) (mA)(1):<0.03

Stability
TEC Short-Term Stability(1 h)(°C):0.001
TEC Output Long-Term Stability(24 h)(°C):0.005

Display Range
Temperature(°C)(Sensor Dependent):-50.0 to +150.0
Display Range Resistance(10 µA)(kΩ):0.1–200
Display Range Resistance(100 µA)(kΩ):0.01–20.00
TE Current(A):-5.00 to +5.00

Resolution
Temperature (°C):0.1
Display Resolution Resistance(10 µA)(Ω):100
Display Resolution Resistance(100 µA)(Ω):10
TE Current (mA):10

Accuracy
Temperature (°C):±0.1
Display Accuracy Resistance(10 µA):±100Ω
Display Accuracy Resistance (100 µA):±10Ω
1)Measured on a resistive load and normalized to 100kHz bandwidth.
Temperature Sensors
Sensor Type:Thermistor
NTC 2-wire:AD592CN LM335AZ
Temperature Control Resolution:0.01 0.1 0.1
Temp. Sensor Control Accuracy:±0.2 ±0.5 ±3.0
Sensor Bias:10/100 µA 12V 1mA

Specifications
Power Requirements 100/120/220/240 VAC,
±10%, 50–60 Hz
Chassis Ground 4mm banana jack
Size(HxWxD)[in. (mm)]3.5(88)x8.5(215)x12.6(320)
Weight [lb(kg)]:8.9(4.05)
Operating Temperature:(°C) 0to40
Storage Temperature Range:(°C) -29to60
Relative Humidity, Storage:<85% humidity non-condensing
Connectors
Output Connectors TE Module and Sensor:15-pin female D-sub
Interface:USB