Rohde&Schwarz AFQ100A /B11 300MHz I/Q Modulation Generator
SOLD OUT sold
gen363












Need Display and Kyebord or PC

Outstanding signal quality
• Tailored to digital communications systems
• Variable memory clock rate (1 kHz to 300 MHz)
can optimally be adjusted to the useful signal
• RF bandwidth of 200 MHz
• Long signal duration of up to 1 Gsample
(R&S®AFQ-B11 option)
• R&S®WinIQSIM2™ options for communications
standards such as LTE, HSPA, WiMAX™, etc.

Output Memory;
Memory clock of the R&S®AFQ100A:1kHz to 300MHz,
Waveform length (data and markers):from 3 samples in steps of 1 sample, waveform memory up to 1 Gsample(B11 Option),
Marker channels:4ch,
control by separate internal signal generators
:pulse, pattern, ON/OFF ratio,
from main memory:4 bits per sample,
offset relative to signal waveform:0 to 2000 samples
Clock generation;
Clock rates,analog output:1 kHz to 300 MHz,
Converter clock:1200 MHz,
Clock rates, digital output;(port 1)
interface clock:100 MHz,data clock:700 MHz (in line with TIA644),memory clock:1 kHz to interface clock rate,
Clock rates, digital output;(port 2)
interface clock:1 kHz to 300 MHz,data clock/memory clock:same as interface clock,
Resolution:1E-7,
Reference frequency;
Output for internal reference;
frequency:10MHz,
aging(after 30 days of operation):1E-6/year,
temperature effect(5 to 45degC):1E-6,
level:0.5 V(rms, sinewave, into 50 Ω),
output impedance:50ohm,
Input for external reference;
frequency:10MHz,
permissible frequency deviation:0.05%,
level:0.2 to 2V(rms,sinewave),
input impedance:50ohm,
Signal output;Output (unbalanced),
Number of outputs:2(I and Q),
Output(unbalanced):1Vp-p(into 50ohm),
level range:0 to 1.5Vp-p(into 50ohm),
hardware attenuator:0 to 21dB in steps of 3dB,
fine variation:+-5%,separately for I and Q channel,
resolution:14 bit,
impedance:50ohm each,
pulse rise/fall time(10 %/90 %):6ns,
level error (DC,at 1Vp-p):<+-1%(at 1kHz),
level difference between the two channels;
<+-0.1%,+-0.05dB up to 50MHz,
frequency response(relative to DC):+-0.1dB(@100MHz),









OPT B11:Waveform Memory 1G sample
E-Manual,DVI-A single(m)-Dsub15p(f) Connector,
CD-ROM*3(R&S AFQ100A I/Q Modulation Generator,R&S WinIQSIM2,VISA IO Libraries),