HP E4916A Crystal Impedance/LCR Meter
SOLD OUT sold
lcr130






Measurement Parameter;
X'tal Mode:
Fr,Fs,Fa,Cl,Q,C1,L1,R1,G0,R0
Sprious Mode:
Sprious Frequency,Impedance of Splious,
CL Mode:
CL,
DLD Mode:
Frequency Max/Min,Cl Max/Min,
Frequency Delta Max/Min,Cl Delta Max/Min,
EM Mode(GP-IB only):
Filter Mesurement Mode:
Input Loss/Standard Loss,delta f(left),
delta f(right)

Signal Source;
1MHz to 180MHz,+-2ppm,resolution 1mHz,
Output:-60dBm to +18dBm(DC-100MHz),
-60dBm to +16dBm(100MHz-180MHz),
-60dBm to 0dBm(Filter Mode),
Resolution 0.1dB,SWR <2.5(SPC),
Harmonic Noize:-20dBc(SPC)
BNC Connector,Impedance:50ohm,
Reverce Power Protect:25dBm,25Vdc,

Input;
Mesurement Range:1MHz to 180MHz,
Resolution:1mHz(Frequency),10mohm(Crystal Impedance),
Return Loss(50ohm input):1MHz Max Input:0dBm(Test port),25dBm(Reference Port),
Damage Level:25Vdc(DC),20dBm(AC),
Average Noize Level:-110dBm/Hz (1MHz to 10MHz),
-130dBm/Hz (10MHz to 100MHz),
-105dBm/Hz (100MHz to 180MHz),
Cross Talk:-100dB(1MHz to 100MHz),
-90dB(100MHz to 180MHz),

320(W)-100(H)-450(D)mm, 5.3kg




Non