If the photograph is clicked, it grows.

NoiseCom J7108 /09 PCIX Programmable Noise Generator
JPY400,000 1 stock
gen516





HF noise to 100MHz

HF noise Pass thru

LF Noise

Noise band
HF:1.5-100MHz,10-100MHz,Path through
LF:<1.5MHz
RF signal addition Input SMA(f)

• Output White Gaussian noise
• Minimum 18 dB Crest factor
• Output noise power -3 dBm (+/- 0.5 dBm)
• Noise attenuation 0 to 63 dB in 0.1 dB steps up to 2 GHz
• Noise attenuator ±0.2 dB or 0.5%
• Signal path gain 0 ±1 dB
• Ultra-low distortion signal path
• Standard connectors SMA female
• 6.25” color VGA, TFT touch screen
• Dimensions: 17.22 in. wide x 6.30 in.
including feet, high x 19.5 in. deep
• Fold-down feet for bench top use
• Power 100-250VAC
• Operating Temperature: -10° to +65°C
Weight 40 LBS 18.14 kg
Length 18 IN 45.72 cm
Width 20 IN 50.80 cm
Height 7 IN 17.78 cm

J7108A 10MHz-500 MHz -3dBm 0.16Vrms -90dBm/Hz Flatness ±0.25/40MHZ
Jopt09 Custom frequency, power
or flatness requirement
Power code